EPSON 8550

01. INSTALLATION OF EPSON ET 8550

• Unpack the product box and take out all the items you received.
• Discard all packing materials from your printer and its accessories.
• Raise the scanner unit and remove all protective items inside your printer.
• Take the power cord you received and connect it to the back of the printer and an electrical outlet.
• Make sure not to connect your printer and the computer yet.
• Turn on your Epson printer by pressing its Power button. If you see an error message, turn off your printer and see if you have left any protective materials inside. Also, ensure that the transportation lock is in the printing position.
• Choose your preferences on the LCD screen.
• Open the ink tank cover and open the ink tank's cap.
• Unpack the ink bottle and insert it into the filling port.
• Once you have filled the ink tank using the respective ink bottle, close the ink tank's cap.
• Repeat the same procedure for all ink tanks and ensure that you have filled the ink tanks according to the color indications.
• Once done, close the ink tank cover.
• Go ahead with the instructions on your printer's LCD screen and select Start to begin the ink charging process. Wait until the process gets concluded, and then you can go ahead to load your paper.
• Extend the paper cassette and slide the guides out.
• Take a paper stack and insert it into the paper cassette with the print side facing down.
• Adjust the guides against the paper stack and reinsert the paper cassette into the printer.
• Insert the supplied CD-ROM into your computer's CD drive. Run the setup file and insert the software on your computer by following the instructions.
• If your computer doesn't include a CD drive, get the software from Epson's official website and install the software.
• Once you install the appropriate software on your computer, connect your printer and the computer to the same wireless network and start printing using the installed software.

WI-FI SETUP FOR EPSON ET-8550

When you establish a wireless connection between your printer and the computer, you can access your printer from the computer without connecting them with any cables. Read this section to know the Wi-Fi setup for your Epson ET-8550.

Connect your printer to your router

• On your printer control panel, tap the Home icon followed by the Wireless icon.
• Select Wi-Fi (Recommended)> Start Setup/Change Settings> Push Button Setup (WPS).
• As soon as possible, press your router's WPS button.
• The connection between your printer and router will be established within a few seconds.

Connect your printer and the computer

• Visit the official support page of Epson from your default browser.
• Enter your printer model and get the driver that supports your Operating System.
• Once you have downloaded the driver, locate the file in the Downloads folder and run the setup file.
• If you find the User Account Control box, just click Yes.
• When the license agreement screen appears, accept the terms and conditions.
• When prompted, choose your connection method as Wireless.
• As you have already connected your Epson printer to your Wi-Fi network, the installer will identify the credentials and then connect the computer to your printer.
• Go ahead with the instructions on the screen and complete the installation.
• Hereafter, you can use the installed software to access your printer wirelessly.

TROUBLESHOOTING SOLUTIONS EPSON ET 8550

Learn the troubleshooting solutions to handle your printer issues on your own. In this segment, we have listed the best troubleshooting solutions for your Epson ET-8550 printer.

Why Epson ET 8550 is not printing?

• If your printer is not printing, see if it is turned on. If there is a power shortage, wait until the issue gets fixed, and then check if you can print.
• If your printer shows any error codes, resolve them with the appropriate solutions.
• If there is a paper jam on your printer, your printer will not print anything. You should remove all the jammed paper from your printer to fix this issue.
• Check the connection between your Epson printer and the computer. If you have connected them using a USB cable, disconnect the cable and reconnect it. If you have connected them over a network, check your Internet's stability. Also, ensure that you have connected them over the same network.

How to get back your Epson 8550 online?

• When there is a communication breakdown between your devices (printer and computer), your printer will not appear online. Get the updated driver from Epson's website and install it on your computer to fix this issue. Sometimes, uninstalling and reinstalling the driver can help you get back your printer online.
• Check if you have enabled Use Printer Offline. Navigate to the Devices and Printers section, right-click on your Epson ET 8550, and select the See what's printing option. Now, go to the Printer tab and ensure that Use Printer Offline is disabled.

Common techniques you can try

• If you keep sending the print jobs to your printer, at some point, they will pile up on your printer's memory. As a result, your printer may start to malfunction. To fix this issue, go to the Devices and Printers section and cancel all the documents you have sent so far.
• Power cycle your printer. To do it, turn off your Epson 8550 and disconnect the power cord. Wait for a minute. Then, reconnect the power cord to your Epson printer and the electrical outlet. Turn on your printer and see if your issue is resolved.
• If your printer driver is outdated, your printer cannot perform well. So, always make sure to keep the printer driver up-to-date. For your Epson ET 8550, you can get the updated software from its official page.

02. INSTALLATION OF EPSON ET 8500

• Unbox your printer and take all the components you received.
• Discard all the protective covers and tapes from your printer and its accessories.
• Ensure that all the items are delivered without any damage.
• Take the power cord and connect it to your printer's rear port and an electrical outlet.
• Turn on your printer and choose your preferred language on the printer control panel.
• Unpack the ink bottles and open the ink tank cover.
• Remove the ink bottle's cap and insert the bottle into the filling port.
• When the ink tank is full, take out the ink bottle from the port and close it with its cap.
• Follow the same procedure for all the ink tanks.
• Once that is done, follow the instructions on the LCD screen to begin the ink charging process.
• Extend the paper cassette and slide the paper guides out.
• Take a paper stack and load it into the paper cassette.
• Adjust the guides against the stack and reinsert the paper cassette into the printer.To establish a connection between your Epson printer and the computer, you should install the appropriate driver.
• You can install the driver on your computer using the supplied CD-ROM. In case your computer doesn't have a CD drive, get the software from Epson's official page and install the software on your computer.
• After that, you can use the installed software for accessing your printer.

WI-FI SETUP OF EPSON ET 8500

To connect your printer and the computer wirelessly, you should connect them to the same network. In this segment, you will see how to connect your printer to your Wi-Fi network. We have also shown you the procedure for connecting your printer and the computer wirelessly.

Connect your printer to your router

• Touch the Home icon on your Epson ET 8500 printer and select the Wireless icon.
• Choose Wi-Fi (Recommended)> Start Setup/Change Settings> Wi-Fi Setup Wizard.
• When your printer displays the nearby networks, select your router's network and enter the password in the appropriate field.
• If you cannot locate your router's name, select Enter Manually and enter your router's credentials.
• Once the connection is established between your Epson printer and the router, the Wi-Fi icon will be displayed on your printer's LCD screen.

Connect your printer and the computer

• Visit the official website of Epson from a browser you prefer.
• Enter your printer name (Epson ET 8500) and reach its support page.
• There, click on Downloads.
• Now, it will detect your OS and display the appropriate drivers.
• If you need the driver for a specific OS, you can choose your preferred OS manually.
• Select the one you prefer the most and download it on your computer.
• Once the download gets concluded, locate the downloaded file in the Downloads folder and run the setup file.
• In case the User Account Control dialog box appears, click Yes.
• When prompted, select the connection method as Wireless and follow the instructions.
• Once the driver’s installed on your computer, you can use it to access your printer.

TROUBLESHOOTING SOLUTIONS FOR EPSON ET 8500

When you know how to troubleshoot the printer issues, you don't need to run behind any technician. In this section, you will see the best solutions to handle your Epson ET-8500 printer issues.

Why Epson ET 8500 is not printing?

• If your Epson ET 8500 is not printing, see if it shows any error code. If so, take the necessary steps to rectify it.
• If there is a paper jam on your printer, remove all the jammed paper and see if your printer can print.
• You must check the connection between your Epson printer and the computer. If you have connected them using a USB cable, check whether the connection is secure at both ends. If the USB cable is damaged, replace it with a new one. If you have connected them over a network, check if you have connected them to the same network.
• It is always important to set your printer as the default one. If you haven't done that yet, go to the Devices and Printers section, right-click on your Epson printer, and select Set as default printer.

How to get back your Epson 8500 online?

• If your printer is offline, you should check whether you have enabled Use Printer Offline. To check it, go to the Devices and Printers section. Right-click on your printer and select See what's printing. Then go to the Printer menu and see if you have enabled Use Printer Offline or Pause Printing. If so, disable them and ensure that you can locate your printer online.
• It is always important to set your printer as the default. When you do that, it will ensure that all the print jobs go directly to your printer. To do it, go to the Devices and Printers section, right-click on your printer, and select the Set as default printer option.
• To access your printer from your computer, they should be connected to the same network. If you have connected them to different networks, you cannot locate your Epson 8500 online.

Common techniques you can try

• If you keep sending the print jobs to your printer, it will start to malfunction. To fix this issue, go to the Devices and Printers section and select cancel all the documents you have sent to your printer so far.
• Any issue can be fixed to some extent with a power cycle. To power cycle your Epson ET 8500, turn it off and disconnect the power cable from both ends. Leave your printer disconnected for a minute. Reconnect the power cord to your Epson printer and turn it on.
• It is always essential to keep your printer's firmware and driver up-to-date. Therefore, whenever you face any problem with your printer, update its firmware and driver to the recent version and check if your problem is resolved.

For further questions and clarifications on Epson 8550 Vs Epson 8500, you can reach our technical experts.