HP ENVY 7120 PRINTER

01. INSTALLATION OF HP ENVY 7120

Unpack and turn on your printer. Configure the basic settings as per your preferences. Complete the printer’s hardware setup by following the prompts displayed on the screen. Finally, install the printer software to complete the setup process.

Unpacking the printer

• Remove the HP Envy 7120 printer and its components out of the box if you haven’t done it yet.
• Now, unpack your printer by removing all the packing tapes, materials, and cardboard pieces from it.
• Ensure that the packing materials present in the cartridge access area are removed.
• After unpacking the printer completely, place it on a clean surface.
• Recycle the packing materials properly.

Turning on the printer

• Connect your printer directly to the power outlet using its power cord.
• Turn on the printer and wait for it to become idle & silent.
• Configure the printer settings when prompted.
• Ensure to press Yes after configuring each setting.

Installing the HP Ink cartridges

• Open the cartridge access door.
• Unpack the cartridges that are shipped along with the printer.
• Ensure that the plastic tape from the cartridges is removed.
• Check to ensure that the carriage is idle and silent.
• Now, install the unpacked cartridges in their slots.
• Ensure that the HP genuine cartridges are seated properly and close the door.

Loading paper

• Get the recommended paper type.
• Pull out the input tray.
• Remove the output tray from the printer.
• Ensure that there is no packing material left in the input and photo trays.
• Now, load the desired plain paper or photo paper into the input or photo tray.
• Align the width guides properly.
• Replace the output tray and close the input tray.
• Now, your printer will automatically begin an initialization process.
• Wait for it to complete, and then go to the next step of the HP Envy 7120 setup.

Installing the printer software or app

• Download and install the HP printer software or the HP Smart app on your computer or smartphone.
• Perform the on-screen instructions to install the printer on your computer or smartphone.
• Finally, print a test page to check if the setup process is done correctly.
• If the printer prints the test page successfully, the setup process is done correctly. Otherwise, re-perform the setup process.
• Congratulations! The HP Envy 7120 printer setup is completed, and it’s ready to use.

WIFI SETUP

You can make use of HP Smart app or the HP printer’s control panel to set up the printer over a wireless network. Continue reading this page to know more about the same.

FOR HP ENVY 7120- Wireless Setup

In this quick guide, we will be taking you through the process of setting up your HP Envy 7120 printer over a wireless network using the printer’s control panel. To perform the same using the HP Smart app, refer to the instructions given under the “HP Envy 7155-Wireless Setup using the HP Smart app” section on this page.

• Turn on your printer, wireless router, and computer.
• Open your printer’s Dashboard.
• Locate and tap on the Wi-Fi icon.
• Select Settings > Wireless Settings > Wireless Setup Wizard or Wi-Fi Protected Setup.
• Connect your 7120 printer over the wireless network by following the prompts displayed on the screen.
• After doing it, connect your PC or laptop to the same Wi-Fi network and run the recommended HP printer software or the HP Smart app to complete the wireless setup.

TROUBLESHOOTING

The troubleshooting guide given below will help you in solving the common HP Envy 7120 or HP Envy 7155 printer problems. Contact us to get real-time technical assistance in solving your printer problems.

FOR HP ENVY 7120

• Restart the printer. This is the quick and simple way to fix almost all the common printer problems.
• Check if any error message is displayed on your printer or computer screen. If yes, clear it, and then use the printer for your needs.
• Ensure that the recommended paper type is loaded in the tray.
• Also, ensure that the HP genuine ink cartridges are loaded properly in their slots.
• Reconnect your printer to the network if necessary.
• Print the printer report to know its status.
• Restore the printer settings to default if they are misconfigured.
• Open the Setup screen.
• Select Printer Maintenance > Restore > Restore Settings > “All” or “choose the setting you want to restore” > Restore > Restore.

02. INSTALLATION OF HP ENVY 7155

Prepare your HP printer for the setup. Connect the prepared printer to the power outlet and turn it on. Set the basic settings when prompted. Similarly, load paper and install the ink cartridges when prompted. Finally, install the printer on your computer or smartphone to complete the setup.

Preparing the printer

• Take the printer out of the product box.
• Remove the plastic cover and Styrofoam pieces from the printer.
• Also, remove all the packing materials from inside and outside the printer.
• Ensure that the packing material from the scanner glass and the cartridge access area are removed carefully.

Turning on the printer

• Plug one of the ends of the power cord into an electrical outlet.
• Connect the other end of the cord to your printer’s power inlet.
• Turn on the printer.
• Configure the basic settings when prompted.
• Ensure to save the configured printer settings.

Installing the ink cartridges

• Gently open the cartridge access door of your printer.
• Unpack the ink cartridges.
• Ensure that the carriage is idle.
• Now, open the cartridge lids.
• Install the unpacked ink cartridges into their slots.
• Ensure that the black cartridge is installed on the right-hand side of the slot and the tri-color on the left-hand side of the slot.
• Close the lids followed by the door.

Loading paper

• Open the input tray.
• Remove the output tray.
• Fan and load a stack of plain, A4, or U.S. paper into the input tray. (If you wish to print photos, load photo paper into the photo tray).
• After loading paper into the input and photo trays, replace the output tray.
• Close the input tray.

Installing the printer

• Before you begin, ensure that the initialization process is completed on your printer.
• Run the downloaded printer software file on your computer. If you wish to install this inkjet printer on your smartphone, install and use the HP Smart app for the same.
• Finally, scan or print a page to check whether the printer setup is done correctly or not.

Congratulations! Your HP Envy Photo 7155 printer has been set up and ready to use.

WIFI SETUP

You can make use of HP Smart app or the HP printer’s control panel to set up the printer over a wireless network. Continue reading this page to know more about the same.

FOR HP ENVY 7155- Wireless Setup

*Note: If you wish to set up your HP Envy 7155 printer over a wireless network using the printer’s control panel, refer to the instructions given above.

• Turn on your Envy 7155 printer if it is turned off.
• Connect your computer, laptop, or smartphone to the same wireless network to which you’re about to connect the printer.
• Disable or disconnect the VPN connection on your computer if it is enabled.
• Now, install and open the HP Smart app on your computer or smartphone.
• Tap or click the Set up a new printer or Add Printer button and follow the on-screen instructions to install the printer on your device over a wireless network.

TROUBLESHOOTING

The troubleshooting guide given below will help you in solving the common HP Envy 7120 or HP Envy 7155 printer problems. Contact us to get real-time technical assistance in solving your printer problems.

FOR HP ENVY 7155

• If you’re facing a problem for the first time, restart your printer. If the same problem remains unresolved even after restarting the printer, try to know more about it and then perform the necessary solutions to fix it.
• Ensure the printer’s hardware setup is completed.
• Check to ensure that your 7155 printer is connected to the computer over a wireless, wired, or USB cable connection securely.
• Reconfigure the printer settings if they are configured wrongly.
• Restore the printer settings if necessary.