HP OFFICEJET PRO 9015

01. INSTALLATION OF HP OFFICEJET PRO 9015:

If you are new to the hp officejet pro 9015 setup, go through the steps given below to complete it within a few minutes.

Unboxing the printer:

Configuring the basic preferences:

• Once you have removed all the packing materials, connect your printer to an electrical outlet using the provided power cord.
• Turn on your printer by pressing the Power button.
• Select your language, region, date, and time on the touchscreen LCD.
• Tap Confirm to save the settings.

Installing the ink cartridges:

• Open the front door and lift the ink cartridge access door.
• Wait for the carriage to move to the center of the printer.
• Unpack the ink cartridges.
• Remove the protective seals from the cartridges.
• Install the cartridges into the slots and close the ink cartridge access door.
• Close the front door and tap OK on the touchscreen panel.

Loading paper:

• Pull out the paper output tray from the printer.
• Ensure that you have removed all the packing materials.
• Slide apart the paper guides.
• Load a stack of legal plain paper into the tray after fanning them well.
• Adjust the paper stack with the paper guides.
• Refix the tray into the printer and tap OK on the control panel.
• If you are asked to align the printhead, touch OK on the LCD.
• If no prompt appears on the LCD, tap the Align Printhead button from the Setup menu to print the alignment page.
• Open the scanner glass and insert the alignment page.
• Tap Scan on the touchscreen panel and wait until the LCD shows the ‘Alignment Successful’ message.

Now, you have completed the hardware setup for your HP OfficeJet Pro 9015 printer. Continue reading the steps to finish the software setup.

Downloading the printer software:

• On your computer, open the default browser.
• Go to the official HP site.
• Input your printer’s model number in the search field and hit the Enter key.
• Click the Software, Drivers and Firmware tab.
• On the next page, check if your OS version has been detected and is displayed at the top of the page.
• If the detected OS version is incorrect, click on the Choose a different OS link and select your OS version.
• Click Update after choosing the correct OS version from the drop-down menu.
• From the list of displayed drivers, click the HP Easy Start software and click the Download button.
• Wait until the download is completed.

Installing the printer software:

• Once you have downloaded the driver file, go to the Downloads section of your browser.
• Double-click the downloaded file to start the driver installation process.
• On Windows, click Yes if the device prompts for User Account Control.
• On Mac, enter the administrator password in the available field and click Continue.
• Agree to the EULA to proceed.

02. INSTALLATION OF  HP OFFICEJET PRO 9025:

If you are new to the hp officejet pro 9025 driver install and looking for a way to complete it quickly, then follow the steps given below.

Unboxing the printer:

• Start by taking out the printer from the package.
• Next, take out the printer supplies and keep them aside for later use.
• Remove the packing materials from the inside and the outside of the printer.
• Try to recycle the packing materials.

Configuring the basic preferences:

• Once your printer is ready for setup, connect the provided power cord to it. Connect the other end of the power cord to a wall outlet.
• Next, turn on your printer by pressing the Power button.
• Choose your desired language, region, date, and time on the LCD.
• Touch the Confirm button on the LCD to save the basic settings.

Installing the ink cartridges:

• To begin with, lift the front cover and open the ink cartridge access door.
• Wait until the carriage becomes silent.
• Open the ink cartridges from the provided package.
• Remove the seals from each cartridge without touching the copper-colored parts.
• Install each cartridge into the carriage and close the ink cartridge access door.
• Lower the front cover and touch the OK button on the LCD.

Loading paper:

• Once you have installed all the ink cartridges into the printer, pull the paper tray.
• Load a stack of legal plain paper into the tray.
• Adjust the paper stack with the paper guides.
• Refix the tray into the printer and tap OK on the LCD to print the alignment page.
• Scan the alignment page and check if the LCD shows the ‘Alignment Successful’ message.

The hardware setup for your HP OfficeJet Pro 9025 printer is over now. Keep reading the steps to complete the software setup.

Downloading the HP printer software:

• Open the default browser on your computer and visit the official HP site.
• Input your printer’s model number in the search field and hit the Enter key.
• Click the Software, Drivers and Firmware tab.
• Ensure that your OS version is detected correctly.
• Select the HP Easy Start software from the available list and click Download.
• Wait until the download is completed.

Installing the HP printer software:

• Close all the running programs and then double-click the downloaded setup file.
• Accept the license agreements in the HP Easy Start window.
• Connect your printer and computer via a standard USB cable.
• If necessary, you can also connect the printer to the same wireless network as your printer.
• On the Printer found screen, check if your printer is detected. If not, click the My Printer is Not Shown button and follow the on-screen instructions.
• After installing the printer driver, print a test page.

You have now completed the hardware and software setup for your hp officejet pro 9025 driver install.